Is Your Paved Driveway Full of Mold and Moss?

Can a Pressure Washer Be Used on Pavers?

When cleaning your paver’s, they can sometimes be brushed using a broom to remove debris and dirt. They can be sprayed also with a garden hose or a pressure washer regularly in order to clean them more in-depth. Any areas which are stained or have mold or mildew growing can be cleaned with a solution of bleach and water, or with a mild detergent. Once you have scoured, the blocks are then rinsed again, thus removing any soapy residue left over.

Most of the time, caring for paver’s only requires they be swept to remove such things as twigs, leaves, or dirt off a driveway, patio or walkway. This can be performed using a straw or push broom. However, if there is a thick layer of debris on your paver, a leaf blower may be required in order to get rid of this material.

One of the simplest techniques to cleaning paver is using a garden hose that comes with a spray nozzle to clean off the paving blocks. This can be done once or twice a year, depending on how bad the paver is. This method will normally get rid of heavy dirt or grime much easier. The blocks are then left to air dry after cleaning.

However, if there is thick ground or mud on the paver, homeowners may have to use a pressure washer to be able to remove it. This must be done carefully, not to chip the block paver or blow out the mortar. You should only use water or a mild detergent for cleaning paver when using this equipment.

Mild detergent can be used also in the event if there are any stains which need removing. It can be applied either using steel wool or a scrub brush. You can mix a solution of bleach and water on areas which have mold or mildew growing. This should be applied using a stiff brush, then clear water to rinse any residue away.

So if you are looking for a professional and reliable pressure washer service in the Rockaway, NJ area, call Majestic Power Washing at (973) 321-1812 today.